5. Visually examine fuse (A) for indications of melting.
6. To remove fuse (A), remove two nuts (B) and pull the
fuse free from holder (existing wiring may need to be
pulled off the stud
fi
rst).
7. Install the new fuse on studs and install any existing
wiring that was removed.
8. Secure with nuts (B).
Figure 5.181: 125A Main Fuse
9. Close cover (B) and secure with tab (A).
10. Return platform to operating position. Refer to
Figure 5.182: 125A Main Fuse
5.14.9 Drive Wheels
Raising Drive Wheels
This procedure applies to both drive wheels.
CAUTION
Header MUST be removed and NO weight box installed. Use a hydraulic jack with minimum lifting capacity
of 2268 kg (5000 lb.) to provide adequate support for the machine.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Remove the header.
2. Park windrower on level ground. Block all wheels.
214053
345
Revision A
Summary of Contents for M1240
