![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727149.webp)
7. Press switch (A) to turn on lights. Always use these
lights on roads to provide warning to other vehicles.
a. Use high/low switch (B) as required when other
vehicles are approaching.
b. Do
NOT
use
fi
eld lights on roads, to avoid
confusing other drivers.
8. Press switch (C) to turn on beacons.
9. Press switch (D) to turn on hazard lights.
Figure 4.49: Light Switches
10. Set the desired maximum ground speed limit. Refer to
Adjusting Ground Speed Limit, page 126
.
NOTE:
Maximum ground speed can be set while the
windrower is moving. Anticipate acceleration or
deceleration if changing maximum speed while
moving.
11. Slowly push throttle (A) to full forward (operating
speed).
CAUTION
Check again to be sure all bystanders have cleared
the area.
12. Move the GSL (B) out of N-DETENT and slowly forward
to desired speed.
Figure 4.50: Operator Console
214053
137
Revision A
Summary of Contents for M1240
