3. Retrieve hydraulic multicouplers (A) and electrical
harness (B) from the header.
4. Route hose/harness bundle toward the windrower
through support (C).
Figure 4.77: Hydraulics Hoses in Storage
Position
5. Insert hose support (A) into hole in the windrower left
leg, and route the header hose bundle (B) under the
windrower to the hydraulic and electrical couplers.
Figure 4.78: Multicoupler
6. Clean multicouplers and receptacles to prevent
contamination.
7. Push button (A) on rear multicoupler receptacle and
rotate handle (B) away from windrower.
8. Open cover (C) and position multicoupler (D) onto
receptacle.
Align pins in coupler with slots in
handle (B), and rotate handle toward windrower so
that coupler is locked onto receptacle and button (A)
snaps out.
9. Push button (E) on front multicoupler receptacle and
rotate handle (F) away from windrower.
10. Open cover and position multicoupler (G) onto
receptacle. Align pins in coupler with slots in handle,
and rotate handle toward windrower so that coupler is
locked onto receptacle and button (E) snaps out.
Figure 4.79: Knife/Reel/Auger Drive
Multicoupler
214053
150
Revision A
Summary of Contents for M1240
