20. Disengage safety prop by turning lever (A) downwards
until lever locks into the vertical position.
21. Repeat for the opposite side.
Figure 4.119: Disengaging Safety Prop
CAUTION
Check to be sure all bystanders have cleared the area.
22. Start the engine.
23. Remove header
fl
oat when prompted by the Harvest
Performance Tracker (HPT).
NOTE:
If not prompted by the HPT to remove
fl
oat,
remove
fl
oat manually. Refer to
24. Lower the header to the ground with HEADER DOWN
switch (A).
25. Press HEADER TILT switches (B) as required on GSL
to release load on center-link.
26.
Windrowers with self-aligning center-link:
Press the REEL UP switch (C) to disengage center-link
from header.
27. Proceed to Step
Figure 4.120: GSL
214053
166
Revision A
Summary of Contents for M1240
