![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727127.webp)
3. Remove the dipstick (A) by turning it counterclockwise
to unlock.
4. Wipe the dipstick clean and reinsert it into the engine.
5. Remove the dipstick again and check the oil level.
Figure 4.9: Dipstick Location
6. Oil level should be between LOW (L) and HIGH (H). If
level is below LOW mark, 1.9 liters (2 US quarts) will
raise the level from LOW to HIGH.
NOTE:
To add oil, refer to
.
7. Replace dipstick and turn it clockwise to lock.
Figure 4.10: Engine Oil Level
4.3.5 Engine Operation
Starting the Engine
DANGER
• Avoid possible injury or death from a runaway machine.
• This machine has safety devices which allow the engine to start only when the ground speed lever is
in PARK, the steering wheel is locked in the NEUTRAL position, and the HEADER ENGAGE switch is in
the OFF position. Under no circumstances are these devices to be deliberately rewired or misadjusted
so that the engine can be started with controls out of NEUTRAL.
• Do NOT start engine by shorting across starter or starter relay terminals. If normal starting circuitry is
bypassed, machine will start with drive engaged and move.
• Start engine only from operator’s seat with controls in NEUTRAL. NEVER start engine while standing on
ground. Never try to start engine with someone under or near machine.
• Before starting engine, be sure there is plenty of ventilation to avoid asphyxiation.
IMPORTANT:
Do
NOT
tow machine to start engine. Damage to hydrostatic drives will result.
214053
115
Revision A
Summary of Contents for M1240
