CAUTION
Check to be sure all bystanders have cleared the area.
11. Start engine and remove header
fl
oat when prompted
by the Harvest Performance Tracker (HPT).
NOTE:
If not prompted by the HPT to remove
fl
oat,
remove
fl
oat manually. Refer to
12. Lower the header to the ground.
13.
For windrowers with self-aligning center-link:
Use
HEADER TILT cylinder switches (A) on GSL to release
load on center-link cylinder.
14. Operate the link lift cylinder with the REEL UP
switch (B) to disengage the center-link from the header.
Figure 4.148: GSL
15.
For windrowers without self-aligning center-link:
Shut off the engine and remove the key.
16. Lift hook release (C) and lift hook (B) off header pin.
CAUTION
Check to be sure all bystanders have cleared the area.
17. Start the engine.
Figure 4.149: Hydraulic Center-Link
214053
178
Revision A
Summary of Contents for M1240
