MacDon M1240, Operator'S Manual

Page: 205 / 488

OPERATION
4. Use the HPT scroll knob or the GSL scroll wheel
to move the red cursor to the HEADER SETTINGS
icon (A).
5. Press the HPT scroll knob or GSL SELECT button to
display the SET-UP HEADER menu list.
NOTE:
The F4 shortcut button on the operator’s console
also will display the SET-UP HEADER menu list.
6. Scroll to the HEADER LOWER/RAISE menu item (B),
and press SELECT. A menu for adjusting header
lower/raise rates opens with the last header setting as
the default starting point.
Figure 4.179: Header Settings Icon and Set-Up
Header Menu List
7. The header lift/lower rate is adjustable in two stages. A
half button press adjusts stage one: the slow rate, and
a full button press adjusts stage two: the fast rate.
Scroll through the RAISE FIRST/RAISE SECOND and
LOWER FIRST/LOWER SECOND menu selections,
and program the following GSL buttons:
• HEADER RAISE (D): half press adjusts fi rst
(slow rate) stage, full press adjusts second (fast
rate) stage
• HEADER LOWER (E): half press adjusts fi rst
(slow rate) stage, full press adjusts second (fast
rate) stage
• ONE-TOUCH-RETURN buttons (A, B and C):
trigger header raise or lower presets.
Figure 4.180: GSL
214053
193
Revision A