![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727180.webp)
1.
Hydraulic
center-link
without
self-alignment:
Relocate pin (A) in frame linkage as required to
raise the center-link (B) until the hook is above the
attachment pin on the header.
IMPORTANT:
If the center-link is too low, it may contact the
header as the windrower approaches the header
for hookup.
Figure 4.123: Hydraulic Center-Link without
Self-Alignment Kit
2. Remove hairpin (B) from clevis pin (A) and remove pin
from header support (C) on both sides of header.
CAUTION
Check to be sure all bystanders have cleared the area.
3. Start engine.
Figure 4.124: Header support
CAUTION
To prevent damage to the header lift linkages when
lowering header lift legs without a header or weight
box attached to the windrower, ensure the
fl
oat
springs tension is fully released.
NOTE:
If not prompted by the harvest performance
tracker (HPT) display to remove
fl
oat, remove
fl
oat manually. Refer to
.
Figure 4.125: Header Float Spring
214053
168
Revision A
Summary of Contents for M1240
