Checking Engine Interlock
CAUTION
Check to be sure all bystanders have cleared the area.
1. With the engine shut down and the HEADER ENGAGE
switch (A) engaged, try to start the engine. If the engine
turns over, the system requires adjustment. See your
MacDon Dealer.
2. With the engine shut down, the steering wheel
NOT
centered, and the ground speed lever (GSL) (B) in
NEUTRAL (but
NOT
in N-DETENT), try to start the
engine. The Harvest Performance Tracker (HPT) will
fl
ash NOT IN NEUTRAL and CENTER STEERING
WHEEL, accompanied by a short beep with each
fl
ash
and the engine should
NOT
turn over. If the engine
turns over, the system requires adjustment. See your
MacDon Dealer.
Figure 5.90: Operator Console
A properly functioning system should operate as follows. If not, see your MacDon Dealer.
• The starter should engage
ONLY
when the GSL is in N-DETENT, steering wheel locked in the CENTER position
and the HEADER ENGAGE switch is in the OFF position.
• The brake should engage and the machine should
NOT
move after engine start-up, under the above conditions.
• The steering wheel should
NOT
lock with the engine running and the GSL is out of the N-DETENT.
• The machine should
NOT
move with the engine running and with the steering wheel still centered, when the GSL
is pulled straight out of N-DETENT (
NOT
in forward or reverse).
214053
292
Revision A
Summary of Contents for M1240
