Connecting R85 16-Foot Header Hydraulics
Refer to the following steps to attach the hydraulic hoses and electrical harness from the header to the windrower.
Note that these steps are also included in the R85 rotary header operator’s manual.
1. Open the left side platform (A). Refer to
Figure 4.137: M1240 Windrower
2. Route hose bundle (A) from header to under
windrower frame.
NOTE:
Route hoses as straight as possible and
avoid rub/wear points that could damage
hydraulic hoses.
3. Insert pin (B) into hole (C) in windrower frame and
place hose bundle on support (D).
Figure 4.138: Hose and Electrical Routing
214053
173
Revision A
Summary of Contents for M1240
