4. Scroll to mode window (A) and select it.
5. Scroll in pop-up window to AUTO and select it.
NOTE:
In AUTO mode, the speed is displayed in km/h or
MPH (B) which cannot be changed.
Figure 4.206: Draper Header Draper Page
6. Scroll to and select the MINIMUM DRAPER SPEED
setting (A) (this setting is grayed out in manual mode).
7. Turn scroll knob to adjust draper minimum speed to
1.6–8 km/h (1–5 mph) with 5 km/h (3.0 mph) as the
default). Press knob to select desired setting.
8. Scroll to INDEX value (C) and select it.
9. Turn scroll knob to set index value. The index range is
+/- 8 km/h (5 mph) (zero, i.e. equal to ground speed,
is the default). Press knob to select desired setting.
NOTE:
The draper operates at MINIMUM SPEED when
the ground speed + the reel index value is less
than the set minimum speed. Minimum reel
speed is displayed (A) and MIN will replace the
AUTO +1.7 (B).
Figure 4.207: Draper Header Draper Page
Setting Draper Speed in Manual Mode
1. If RUN SCREEN 1 is not already displayed, press soft
key 1 (A) on the Harvest Performance Tracker (HPT)
to display draper RUN SCREEN 1.
Figure 4.208: Header Run Screen 1
214053
204
Revision A
Summary of Contents for M1240
