2. Place oil pan below
fi
lter.
3. Clean around the
fi
lter head (A) and remove
fi
lter.
NOTE:
Check that gasket is removed from
fi
lter head.
4. Clean gasket mating surface.
5. Apply a thin
fi
lm of clean oil to the gasket on the new
fi
lter. Refer to
5.1.4 Filter Part Numbers, page 237
for
recommended oil
fi
lter to use.
6. Screw the new
fi
lter onto the
fi
lter mount until the
gasket contacts the
fi
lter head.
7. Tighten the
fi
lter an additional 1/2 to 3/4 turn by hand.
IMPORTANT:
Do
NOT
use a
fi
lter wrench to install the oil
fi
lter.
Overtightening can damage the gasket and
fi
lter.
8. Properly dispose of used oil
fi
lter.
Figure 5.68: Engine Oil Filter
Adding Engine Oil
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Shut down the engine and remove the key. Wait about
fi
ve minutes.
2. Open the hood. Refer to
.
3. Clean around
fi
ller cap (A) and remove by turning it
counterclockwise.
4. Carefully pour in 14 liters (14.8 qts. U.S.) of new oil.
A funnel is recommended to avoid spillage. Refer to
5.1.3 Lubricants, Fluids, and System Capacities, page
236
for oil speci
fi
cations.
CAUTION
Do NOT
fi
ll above the HIGH mark.
5. Replace oil
fi
ller cap (A) and turn it clockwise until snug.
6. Check the oil level. Refer to
.
7. Close the hood. Refer to
.
Figure 5.69: Oil Filler Cap
214053
279
Revision A
Summary of Contents for M1240
