2. Push platform (A) towards the cab until it stops and
latch engages.
Figure 5.9: Platform: Closed
5.4.3 Adjusting the Platform
To achieve proper gap between platform and frame, latch adjustment may be required.
1. Adjust the latch position by loosening bolts (A) and
moving the latch (B).
2. Retighten bolts (A) and close the platform.
Figure 5.10: Left-Hand Platform
3. The rubber bumper (B) at the cab end of the platform
should measure 52–60 mm (2–2.4 in.) when properly
compressed against the frame. Platform should also
sit
fi
rmly against the front guide (A).
4. If adjustment is required, loosen two bolts (C) and slide
support as required.
5. Tighten bolts (C) to 39.5 N
·
m (29.1 ft
·
lbf).
Figure 5.11: Left-Hand Platform: Top Plate Not
Illustrated
214053
247
Revision A
Summary of Contents for M1240
