8. Connect wiring harness connector to headlight.
9. Attach headlight bracket assembly (B) using retained
bolts (A).
10. Align new headlight. Refer to
Figure 5.157: Right Side Headlight Shown –
Left Side Similar
11. Attach electrical connectors to red tail lights (C).
12. Attach headlight bezel assembly (B) to frame using
the eight retained hex
fl
ange bolts (A). Torque bolts to
2.0–2.7 N
·
m (18–24 in
·
lbf).
Figure 5.158: Headlight Bezel Assembly
Replacing LED Lights (Deluxe Cab Only)
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
The M1240 Windrower deluxe cab is equipped with the following LED lights (MD #207062):
• Four LED
fi
eld lights (A)
• Two LED stubble lights (B)
• Two LED rear work lights (C)
The bulb of an LED light cannot be replaced. If a light fails, please contact your MacDon Dealer for replacement parts.
214053
330
Revision A
Summary of Contents for M1240
