![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727166.webp)
10. Stop the engine and remove key from ignition.
11. Lift hook release (A) and lift hook (B) off header pin.
NOTE:
If optional center-link self-alignment kit is
installed, lift release (C) and then operate the link
lift cylinder with the REEL UP switch on the GSL
to disengage the center-link from the header.
Figure 4.88: Hydraulic Center-Link
12. Disconnect header drive hydraulics (A) and electrical
harness (B) from the windrower.
Figure 4.89: Header Drive Hydraulics
13. Place the hydraulics/electrical bundle (A) in storage
position on the header.
14. Back windrower slowly away from header.
Figure 4.90: Hydraulics Hoses in Storage
Position
214053
154
Revision A
Summary of Contents for M1240
