Replacing Headlight Bulb (Engine-Forward)
1. Remove eight hex
fl
ange bolts (A) then remove
headlight bezel assembly (B). Retain hardware.
2. Remove electrical connectors from red tail lights (C) to
fully remove bezel (B).
Figure 5.154: Headlight Bezel Assembly
3. Remove the two bolts (A) holding the headlight
bracket (B) in place and slide bracket forward.
4. Pull wiring harness connector off the headlight and
remove assembly (A).
Figure 5.155: Right Side Headlight Shown –
Left Side Similar
5. Remove four machine screws (A) and nylon nuts (B)
and retain hardware.
6. Remove old headlight from bracket and replace with
new headlight.
IMPORTANT:
Do
NOT
touch the glass of the halogen bulb as
the oils or other chemicals from your skin will
cause the bulb to fail prematurely.
7. Attach headlight to bracket using four retained machine
screws (A) and nylon nuts (B). Torque screws to
2.0–2.7 N
·
m (18–24 in
·
lbf).
Figure 5.156: Right Side Headlight Shown –
Left Side Similar
214053
329
Revision A
Summary of Contents for M1240
