To make a voice-signaled transfer to a system phone, in Step 2 of the
procedure on the previous page press
*
plus the two-digit extension
number. Then listen for one of the following responses:
—
If you hear
one beep, you have reached an idle system phone. You can
speak after the beep.
Your voice is heard through the other extension’s speaker. If no one
answers or the call is refused, press the line button next to the winking
green light to reconnect to the caller. If the call is accepted, hang up.
—
If you hear
two beeps, you have reached a busy system phone with
Voice Interrupt On Busy Assigned. You can speak after the beeps.
Your voice is heard through the recipient’s handset or speaker. Be
aware that the third party to whom the recipient is speaking probably
also will hear the two beeps and the faint sound of your voice. Be brief
and discreet in your interruption. If the recipient has a Voice Interrupt On
Busy Talk-Back button, wait for a response. If the call is accepted, hang
up to complete the transfer. The call rings at the recipient’s extension. If
the call is refused, press the line button next to the winking green light to
reconnect to the caller.
—
If you hear
ringing, you have reached a standard phone, an idle MLC-6
or TransTalk 9000-series phone, or a busy system phone with Voice
Interrupt On Busy Not Assigned.
When someone answers, announce the call, then hang up. If no one
answers or the call is refused, press the line button next to the winking
green light to reconnect to the caller.
To transfer a call with one button touch:
While on a call, press the Auto Dial button programmed for the extension, or
the Hunt Group or Calling Group button for the group, to which you want to
transfer the call. (There is no need to press
&
or
n
; this takes the
place of Steps 1 and 2 in the procedure on the previous page.)
For an extension that has a system phone, you can program
*
plus the
extension number on the Auto Dial button, so you can announce the calls
when you transfer them.
5-186
Transferring Calls
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
