If a user has a standard phone or a non-display system phone,
for the extension can be programmed only by
using Centralized Telephone Programming.
To program at the extension, use the following procedure:
1.
To start programming, dial
f
0
0
.
The green lights next to buttons on which lines are assigned for the
extension show the current Line Ringing settings. Remaining buttons can
be programmed with telephone numbers, extension numbers, or system
features.
2.
To assign a name to the extension, press left
i
, then enter the character
in Chapter 5 for the codes.
3.
Program
Personal Speed Dial Numbers,
Auto Dial
numbers, or system
features as described in Chapter 5.
To erase the current programming from a button, press the button, then
press
!
.
4.
To exit programming mode, you can press
f
0
0
, or lift the handset
off-hook, then place it back in the cradle.
2-26
Programming
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
