Ring on Transfer (#119)
Description
This System Programming procedure lets you specify what callers hear while
they are being transferred. If Ring on Transfer is set to Active, callers hear
ringing as they are being transferred; it it is set to Not Active, callers hear silence
unless Music On Hold is activated and an audio source is connected to the
system. If this is the case, callers hear music while the call is being transferred
to the destination extension. Once there, callers hear ringing until the call is
answered or it is sent to the voice messaging system.
Related Features
If you have an audio source connected to the system, set
to Active and Ring on Transfer to Not Active, so callers hear music as
they are being transferred to the destination extension.
This procedure has no effect on
Direct Extension Dial
Valid Entries
1 = Active
✔
2 = Not Active
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To change Ring on Transfer:
1.
Press
f
0
0
s
s
#
1
1
9
at extension 10
or 11.
2.
Press
D
until the appropriate value displays.
3.
Select another procedure or exit programming mode.
5-152
Ring on Transfer (#119)
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
