Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To identify the types of outgoing calls that can be made on all lines at an
extension:
1.
Press
f
0
0
s
s
#
4
0
1
at extension 10
or 11.
2.
At the
Extension:
prompt, enter the number of the extension to be
programmed. For example, to select extension 30, press
3
0
.
3.
To change the type of call restriction, press
D
until the appropriate
value displays.
4.
To program another extension, press
n
or
p
until the extension
number shows on the display. Repeat Step 3.
5.
Select another procedure or exit programming mode.
5-138
Outgoing Call Restriction (#401)
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
