Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program a Call Forwarding button:
1.
Press
f
0
0
s
s
c
at extension 10
or 11.
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button, preferably a button with lights.
4.
At this point, you can:
Press
f
1
1
, or
Press
f
1
1
and the number of the originating extension, or
Press
f
1
1
, the number of the originating extension, and the
number of the destination extension.
5.
Program another button for this extension or exit programming mode.
Using
System Phone
To forward calls manually:
1.
Press
f
1
1
.
2.
Dial your extension number.
3.
Dial the extension number at which you want the calls to ring.
To remove Call Forwarding manually:
1.
Press
f
1
1
.
2.
Dial your extension number
twice.
To forward calls using the programmed button:
1.
Press the programmed button.
If an originating extension and a destination extension were programmed
on the button, Call Forwarding is activated (on a button with lights, the
green light is on). Skip Steps 2 and 3.
2.
If no originating extension was programmed, dial your extension number.
3.
If no destination extension was programmed, dial the extension number at
which you want the calls to ring.
Call Forwarding is activated (on a button with lights, the green light is on).
5-32
Call Forwarding/Call Follow-Me (F11,XX,XX)
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
