If you program 911 or other emergency numbers as Speed Dial numbers
and want to place test calls, you should: 1) perform such activities in the
off-peak hours, such as early morning or late evening and 2) remain on the
line and briefly explain to the dispatcher the reason for the call before
hanging up.
You can use multiple Auto Dial buttons and Speed Dial numbers during the
course of a single call. For example, you can use an Auto Dial button or
Speed Dial number to dial the Account Code Entry feature code, and
another Speed Dial number to dial the account code.
Valid Entries
Any phone number—up to 28 characters consisting of the digits 0–9,
*
,
#
,
and special dialing functions that you can access by pressing
h
(Pause),
!
(Stop),
S
(Recall), and
&
(Touch-Tone Enable)—assigned to
codes 600 through 699
No number assigned to any code
✔
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program System Speed Dial numbers:
1.
Press
f
0
0
at extension 10 or 11. A display similar to the following
appears:
PROGRAM EXTENSION 10
2.
Select a three-digit code by pressing
f
and dialing three digits between
600 and 699. For example, to select code 600, press
f
6
0
0
.
If a number is assigned already to the code, the number appears on the
display. If no number is assigned to the code, the display reads:
Blank
3.
Enter the number. For example, to program 555-4757, press
5
5
5
4
7
5
7
. The following display appears:
5554757
To mark the System Speed Dial number to override dialing restrictions,
precede the number by a
*
. For example, to mark the number 555-1001,
press
*
5
5
5
1
0
0
1
. The following display appears:
*5551001
4.
At this point:
To program another System Speed Dial number, start from Step 2.
To program over an existing number, enter the new number after
selecting the three-digit code.
To remove a System Speed Dial number, enter the number’s three-digit
code and press
!
once.
5.
Press
f
0
0
to exit programming mode.
5-176
System Speed Dial Numbers
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
