Toll Call Prefix (#402)
Description
This System Programming procedure indicates whether users must dial a 0 or 1
before the area code to make a long-distance call, or just the area code and
number. This feature should be set to reflect the dialing patterns of your local
telephone company.
Related Features
This procedure affects the operation of dialing restrictions and permissions. For
more information, see
Allowed Phone Number Lists (#407)
and
Emergency Phone Number List (#406)
Valid Entries
1 = 0 or 1 required before Area Code and Number
✔
2 = Area Code and Number Only
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To change the Toll Call Prefix setting:
1.
Press
f
0
0
s
s
#
4
0
2
at extension 10
or 11.
2.
Press
D
until the appropriate value displays.
3.
Select another procedure or exit programming mode.
Toll Call Prefix (#402)
5-179
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
