Copy Settings (#399)
Description
This System Programming procedure copies all of the following settings from one
extension to another:
#301 Line Assignment
#401 Outgoing Call Restriction
#302 Line Access Restriction
#405 Disallowed List Assignments
#303 Display Language
#408 Allowed List Assignments
#304 Automatic Extension Privacy
#501 Pickup Group Extensions
#305 Abbreviated Ringing
#502 Calling Group Extensions
#307 Forced Account Code Entry
#504 Night Service Group
#308 Distinctive Ring
#505 Hunt Group Extensions
#309 Intercom Dial Tone
#601 Fax Machine Extensions
#310 Automatic VMS Cover
#607 AA Extensions
#311 External Hotline
#612 Contact Closure Group
#312 Voice Interrupt On Busy
Automatic Line Selection
#316 Call Waiting
Line Ringing
Considerations
This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code (
#399
) directly.
For each type of phone, program one extension, then use this procedure to
copy the programming from that extension to the others with the same
number of line buttons (for example, from a PARTNER-18D phone to a
PARTNER-18 phone).
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To copy the programmed settings from one extension to another of the same
type:
1.
Press
f
0
0
s
s
#
3
9
9
at extension 10
or 11.
2.
At the
Extension:
prompt, enter the source extension to copy from. For
example, to copy the current settings from extension 18, press
1
8
.
3.
At the
Data
- - - - - - - - - - - -
prompt, enter the target extension to copy to—any
extension except the source extension is valid. For example, to copy to
extension 22, press
2
2
.
4.
At this point:
To copy the same settings to another extension, enter the new
extension number.
To copy another extension’s settings, press
n
or
p
until
the extension number shows on the display. Repeat Step 3.
5.
Select another procedure or exit programming mode.
Copy Settings (#399)
5-55
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
