Receptionist Backup.
If you want all calls on a line to ring directly at users’
extensions—with the receptionist providing backup—set the line at the
users’ extensions to Immediate Ring. Then set the line on the receptionist’s
extension to Delayed Ring. An incoming call that is not answered by a user
within 20 seconds also rings at the receptionist’s extension.
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To change the way outside lines ring at an extension:
1.
Press
f
0
0
s
s
c
at extension 10
or 11.
2.
Enter the number of the extension to be programmed for Line Ringing.
The green lights next to the line buttons show the current Line Ringing
settings for all lines assigned to the extension. (If a line is not assigned to
a button, the green light next to that button is off.) The following ringing
options can be shown by the green light next to the line button:
Immediate Ring—
on steady
Delayed Ring—
flashes slowly
No Ring—
flutters quickly
3.
To change Line Ringing on any line, press the line button until the button light
shows the correct setting (the setting for the currently selected line also
appears on the display).
4.
Continue programming or exit programming mode.
5-116
Line Ringing
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
