Intercom Autodialers
PARTNER-model system phones support the PARTNER-CA48 Call Assistant
Intercom Autodialer at extensions 10 and 11. The autodialer provides Auto Dial
buttons for all of the extensions in your system (up to 32). (The extra 16 buttons
on the autodialer are not operational on your system.) The status lights next to
each button also indicate calling activity at that extension. Users can program
the Auto Dial buttons for either intercom ringing, voice signaling, or manual
signaling. (Note that each user can have only one Auto Dial button—either on
the system phone
or on the autodialer—for another extension in the system.)
The Auto Dial buttons allow the user to dial, signal, or transfer calls to system
extensions with one touch. For more information about Auto Dial buttons, see
“Auto Dialing” in Chapter 5.
Standard Telephones
You can also use industry-standard single-line rotary or touch-tone telephones,
including feature phones with built-in feature buttons and lights, with the system.
This guide refers to such telephones as
standard phones. Lucent
Technologies-certified standard phones are recommended.
The following Lucent Technologies phones can make use of the system’s
message-waiting capability:
2500 YMGL Single-Line Analog Telephone Set
8101 Analog Telephone
8101M Analog Telephone
(This model is recommended.)
8102 Analog Telephone
8110 Analog Telephone
7102 Plus Analog Voice Terminal
Check with your local Lucent Technologies Representative or local Authorized
Dealer to find out whether other standard phones with message-waiting lights will
work.
NOTE:
For message waiting capability, you must connect standard phones with
LED-compatible message-waiting lights to a PARTNER ACS processor module
or to Release 3.1 (R3.1) or later 206 modules. This message-waiting capability
does not work with standard phones with
neon-type message-waiting lights.
Overview
1-7
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
