Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program a Night Service Button at extension 10:
1.
Press
f
0
0
s
s
#
5
0
3
at extension 10
or 11.
2.
At this point:
If you want to assign Night Service to the first available button, press
D
until a display similar to the following appears:
Night Service Button
1 Assigned - Ext10
If you want to remove the Night Service button assignment, press
D
until a display similar to the following appears:
Night Service Button
2 Not Assigned
If you want to assign Night Service to a specific button, press
3
. A
display similar to the following appears:
Night Service Button
3 Select a Button
Then press a programmable button with lights to assign Night Service
to that button.
3.
Select another procedure or exit programming mode.
4.
Label the Night Service button at extension 10.
Using
To turn Night Service on:
1.
Press the Night Service button at extension 10.
If a System Password is programmed, the green light next to the button
flashes; you must continue with Step 2.
If no System Password is programmed, the green light is on steady and
Night Service is on.
2.
Enter the password.
The green light is on steady. Night Service is on.
Night Service Button (#503)
5-133
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
