Poor Transmission Quality on Modem
Possible Cause: A high-speed modem is connected through an extension jack on the
control unit to a standard Central Office telephone line; but the line quality is not sufficient
to generate a clear signal when the modem transmits through the system interface.
What to do: Either connect the modem directly to the network interface jack for a line, or
contact your local telephone company for information about upgrading the line quality.
If the device works properly, the problem is solved.
If the problem remains, call the hotline.*
Other Problems with System
The following procedure resets the system. Use it when you have any problems that are
not covered elsewhere in this chapter. The procedure disconnects all calls in progress,
but does not erase any system settings,
provided that the system batteries are installed
and not low on power
.
Possible Cause: System needs a hardware reset.
What to do: Unplug the control unit’s power cord from the wall. Wait 10 seconds, then
plug it back in. If the problem remains, call the hotline.*
*
In the continental U.S., help is available at 1 800 628-2888. Outside the continental U.S., call your
Lucent Technologies Representative or local Authorized Dealer.
6-26
Troubleshooting
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
