Direct Line Pickup—Idle Line (I8LL)
Description
This feature allows users to access a specific outside line (where
LL is a line
number from 01–15) when the line is not in use. This feature is useful for
accessing a line that is not assigned to the phone.
Related Features
If a line is
in use, users cannot access it with this feature (they hear busy
tone). For information about accessing a ringing or held call, or joining a
call in progress, see
Direct Line Pickup—Active Line
Line Access Restriction (#302)
is set to No Access or In Only for a line
assigned to an extension, a user at the restricted extension hears busy tone
if Direct Line Pickup is used to access that line to place a call.
Considerations
You can program a Direct Line Pickup—Idle Line button on a system phone to
pick up a line by pressing the button then dialing the two-digit line number.
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program a Direct Line Pickup—Idle Line button:
1.
Press
f
0
0
s
s
c
at extension 10
or 11.
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press left
i
8
.
5.
Program another button for this extension or exit programming mode.
Using
System Phone
1.
If you want, lift the handset.
2.
Press the programmed button and dial the two-digit line number (01–15) of the
idle line you want to access; or press
i
8
and the two-digit line
number.
If you did not lift the handset, the speaker comes on automatically.
Standard Phone
1.
Lift the handset.
You hear intercom dial tone.
2.
Dial
8
and the two-digit line number (01–15) of the idle line you want to
access.
Direct Line Pickup—Idle Line (I8LL)
5-59
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
