Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Page: 28 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Introduction
What You Need on Your PC
1-10
What You Need on Your PC
1
To install and run CentreVu Supervisor, you need the following recommended
configuration:
●
A Pentium
*
133 MHz processor.
NOTE:
The minimum supported PC configuration is an Intel 486-compatible 66
MHz processor. If you have this configuration, expect to experience slower
response time.
●
A hard disk drive with 50 MB of free space. If you are installing Supervisor
in more than one language, you will need an additional 5 MB of disk space
for each language installed.
●
A CD-ROM drive.
●
Minimum of 32 MB RAM. If simultaneous Supervisor instances are
running in the background, additional memory may be required to maintain
acceptable performance.
●
An SVGA monitor and adapter set to at least 800x600x256 colors graphics
resolution.
●
Microsoft Windows 95 or 98 or Windows NT 4.0 operating system with
Service Pack 4.
NOTE:
If you are installing Supervisor on a Windows NT 4.0 operating system,
you must first install the Microsoft Service Pack 4 or later version.
●
A mouse compatible with the supported Windows operating systems.
●
For Network Connection
— WinSock 1.1 compliant TCP/IP stack
— Ethernet communications board.
* Pentium is a registered trademark of Intel Corporation.