Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Page: 76 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Getting Started with CentreVu Supervisor
Overview
5-2
Establishing CentreVu CMS Server Connection
Settings
5
You must establish connection settings in order to connect to the CMS server. If
you have already established connection settings, go to the following sections:
●
“Logging Into the CMS Server — First Time” on page 5-9
●
“Logging Into CMS Server — After First Time” on page 5-10 .
There are three connection options:
●
Network
●
Serial
●
Modem.
You can set these options to connect to the CMS server one of two ways:
●
Automatic—used to login to the CMS server directly from Supervisor
●
Manual—used to login to the CMS server by way of the server’s Solaris
*
system. You would use manual login for the following reasons:
— You need to access
cmssvc
and
cmsadm
menus
— You are instructed to do so for troubleshooting purposes
— Your version of Supervisor resides in a different Solaris system than
the CMS server.
NOTE:
For more information about your Solaris system, see your Solaris system
administrator.
Now you are ready to open Supervisor and establish a connection to the CMS
server. See “
Opening the CentreVu Supervisor Application” on page 5-3 .
*Solaris is a registered trademark of Sun Microsystems.