Lucent Technologies CentreVu Supervisor Installation And Getting Started Manual Download Page 91

Page: 91 / 306

CentreVu Supervisor Version 8 Installation and Getting Started

Getting Started with CentreVu Supervisor
Changing Connection Settings

5-17

The Server Properties window appears. Notice that the Server Name is
displayed and cannot be changed.

In the Connection box, click on the type of connection you want, Network,
Serial, or Modem.

NOTE:

See “

Establishing the Connection” on page 5-4

for information on entering

serial and modem information.

Change any settings as needed.

10. Select OK to change the connection.

The CMS Servers tab folder appears.

Summary of Contents for CentreVu Supervisor



















































































































































































































































































































Search results

Summary of Contents for CentreVu Supervisor

Reviews:

Related manuals for CentreVu Supervisor

Brands by name

Popular brands

Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Search results

Summary of Contents for CentreVu Supervisor

Reviews:

Related manuals for CentreVu Supervisor

Brands by name

Popular brands