Lucent Technologies CentreVu Supervisor Installation And Getting Started Manual Download Page 248

Page: 248 / 306

CentreVu Supervisor Version 8 Installation and Getting Started

Installing and Using CentreVu Terminal Emulator
Terminal Messages

8-24

Information Messages

The following messages are displayed in a box with Yes and No buttons:

The profile {name} exists, replace?

This message appears if you try to save a profile named {name} and it already
exists.

Save changes to {name}?

This message appears if you try to exit the Terminal without saving changes to
the profile named {name}.

A connection is active, exit anyway?

This message appears if you try to exit the Terminal while a connection is
active.

Summary of Contents for CentreVu Supervisor



















































































































































































































































































































Search results

Summary of Contents for CentreVu Supervisor

Reviews:

Related manuals for CentreVu Supervisor

Brands by name

Popular brands

Lucent Technologies CentreVu Supervisor, Installation And Getting Started Manual

Search results

Summary of Contents for CentreVu Supervisor

Reviews:

Related manuals for CentreVu Supervisor

Brands by name

Popular brands