Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 299 / 1421

Mount next SM ODD write enabled tape and continue tape write operation.
At the MCC, type and enter:
COPY:BKDISK,ACK:TPSIZE=2300(60M for DAT);
Response: Same as previous COPY:BKDISK:START response.
8. Note: All SM ODD partitions must be copied during the same backup session.
Are there more SM ODD partitions to be copied to backup tapes?
If YES , select the next SM ODD partition, mount next SM ODD write enabled backup tape, and repeat from
Step 4.
If
NO
, continue to next Step.
9. Note: If more than one tape was required, each tape must be mounted on the tape drive and verified
separately.
To verify the SM ODD tape(s), type and enter either (a) or (b) for each tape:
(a)
For Single Volume Tape format:
VFY:TAPE,TD="/dev/mtxx":RETRY=3:;
Where:
xx = 00 or 08 from Step 4.
(b)
For Multi Volume Tape format:
VFY:TAPE,TD="/dev/mt08":RETRY=3,SESS=x,VOL=v:;
Response: VFY TAPE STARTED
VFY TAPE COMPLETED RETRIES 0 HEADER MISMATCHES 0
DATA MISMATCHES 0
10. Did the verify complete successfully?
If
YES
, continue to next Step.
If
NO
, then
seek technical assistance.
11. To restore REX scheduling, at the MCC, type and enter:
ALW:DMQ:SRC=REX;
12. Restore ODD automatic backup schedule. Use the information obtained in 6.23.1 , Step 6,
Type and enter:
BKUP:ODD:EVERY=a,AT=b;
Where:
a
= number of days for every ODD backup to run
b
= time of day in the hour and minutes (for example, 2330 = 11:30 p.m.)
235-105-210 October 1999
Copyright © 1999 Page 54