Lucent Technologies 5ESS-2000 Operations And Maintenance Procedures Download Page 177

Page: 177 / 1421

Where:

= Month in which first software update of range was issued.

= Day on which first software update of range was issued.

= Year in which first software update of range was issued.

= Month in which last software update of range was issued.

= Day on which last software update of range was issued.

= Year in which last software update of range was issued.

Response:

Summary of software updates (if any) by range of software update issue dates.

10.

Now go to Step 18.

11.

At SCANS terminal, type and enter:

SUM,S 5E,G 5E a

(SUMMARY)

At SCANS terminal, type and enter:

SUM+,S 5E,G 5E a

(LONG SUMMARY)

Where:

= Software release currently in system

Response:

Summary of software updates (if any) by

5ESS

-2000 switch software release name option.

12.

Now go to Step 18.

13.

At SCANS terminal, type and enter:

SUM,S 5E,G 5E a,I b

(SUMMARY)

At SCANS terminal, type and enter:

SUM+,S 5E,G 5E a,I b

(LONG SUMMARY)

Where:

= Software release currently in system.

= Software release issue currently in the system.

Response:

Summary of software updates (if any) by

5ESS

-2000 switch software release issue option.

14.

Now go to Step 18.

15.

At SCANS terminal, type and enter:

SUM,S 5E,K a

(SUMMARY)

At SCANS terminal, type and enter:

SUM+,S 5E,K a

(LONG SUMMARY)

Where:

= keyword name - which could be a change notice (CN) number or other such keyword

variable.

Response:

Summary of software updates (if any) by keyword option.

16.

Now go to Step 18.

17.

At SCANS terminal, type and enter:

SUM,S 5E,TY a

(SUMMARY)

At SCANS terminal, type and enter:

SUM+,S 5E,TY a

(LONG SUMMARY)

Where:

= one of the following software update types

GEN - Software release change
INF - Information only
APT - Auxiliary software change
APW - Auxiliary software change
PAR - Parameter

235-105-210

October 1999

Page 2

Summary of Contents for 5ESS-2000




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5ESS-2000

Reviews:

Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures, Page: 177 / 1421

Search results

Summary of Contents for 5ESS-2000

Reviews: