Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures, Page: 947 / 1421

b = MSU/MMSU number, 0-1
c = Service group number, 0-1
d = Scan board number, 0-1
Response:
RMV SCAN =
a-b-c-d
COMPLETED
3. Select and prepare terminal for RC/V activities.
Reference:
Procedure 11.1
4. Are scan point assignments new or update assignments?
If
NEW ASSIGNMENTS , continue with next step
If
UPDATE ASSIGNMENTS
, go to Step 9
5. To assign new scan points, at the RC/V terminal, type and enter
8.13i
Response: The MSU/MMSU SCAN POINT ASSIGNMENT page is displayed. The cursor is positioned at
the SCAN POINT field.
6. Type and enter data for the following fields:
*1. SCAN POINT ____ See Note 1
2. SCAN POINT TYPE _______ See Note 1
3. ACTION ___ See Note 1
4. NORMAL STATE ________ See Note 1
#5. IN USE ___ See Note 1
6. DUPLEX SCAN POINT ________ See Note 1
7. SIDE __ See Note 1
8. LABEL ____________ See Note 1
9. VERBOSE __ See Note 1
PORT CONDITIONING
10.
TN ________ See Note 1
11. MLHG ________ See Note 1
12. TERM ________ See Note 1
13. TGN ________ See Note 1
14. MEMB ________ See Note 1
NOTE 1: Refer to field definitions in 235-118-250, Section 10.15, "Recent Change Reference for
8v13 (RC_MSUSP)."
NOTE 2: For fields requiring no entry, type and enter an apostrophe (') to blank the field. For default values,
type and enter a semicolon (;) for the field. Once all the fields are completed, the following response
appears:
Response:
Enter I=Insert, R=Review, U=Update, D=Delete
7. To insert the data, type and enter i
Response: inserting . . . FORM INSERTED. The MSU/MMSU SCAN POINT ASSIGNMENT page is
displayed. The cursor is positioned at the SCAN POINT field.
8. Go to Step 15.
235-105-210 October 1999
Copyright © 1999 Page 2