Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 1023 / 1421

8. Type and enter
U
Response: updating...FORM UPDATED
SWITCHING MODULE (RC_EQIM) 18V1 page displayed.
Cursor at SM attribute.
9. Type and enter
<
Response: 18.0 SM & REMOTE TERMINALS VIEWS
page displayed.
10. Type and enter Q
Response: RCV-196 COMPLETED
11.56.6.3 Power Down MCTSI Side 0 And Replace Circuit Pack
1. At the MCTSI cabinet, side 0 PCD pack, depress:
OFF button.
Response: REPT PWR OFF MCTSI=
a
-0
Where:
a = EXM-2000 number
2. WARNING: An antistatic wrist strap must be worn while handling circuit packs or system cables
to prevent damage to components by static electricity.
Remove the UM74B/UM74C circuit pack from MCTSI side 0 (per EQL below) and replace with UM74D.
EQL 62-020 TSIU4
EQL 45-017 TSIU4-2
11.56.6.4 Power Up MCTSI Side 0
1. At the MCTSI cabinet, side 0 PCD pack, depress the ON button.
Response: REPT PWR ON MCTSI=
a
-0
Where:
a = EXM-2000 number
11.56.6.5 Diagnose MCTSI Side 0
1. At MCC, either:
type input message:
DGN:MCTSI=
a
-0,PH=33,RAW,TLP;
or
enter input command:
500,PH=33
(1190,a CMD)
Where:
a = EXM-2000 number
235-105-210 October 1999
Copyright © 1999 Page 11