Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 1199 / 1421

14.19.5.2 Tape Loading
NOTE: Tape loading is required only once, even if several memory packs (on the same SAS unit) are being
updated at different intervals. The recent change data is transferred to a temporary directory/file for later
update of the recent change view.
1. Mount tape on drive.
2. At the MCC or STLWS, type and enter:
exc:envir:uproc,fn="/bin/mkdir",args="/updtmp/annc";
Response:
Wait for a completion message before continuing.
3. Type and enter:
copy:tape:in,td="/dev/mt00",bsdir="/updtmp/annc";
Response: COPY TAPE IN COMPLETED:
4. To list files copied to the switch from tape, type and enter:
exc:envir:uproc,fn="/bin/ls",args="/updtmp/annc";
Response: A list of files will be printed, most will have the format:
rc-xxx-xxx
Print and save this list for later reference.
14.19.5.3 Apply Standard Inflection Data (RC View 8.60)
NOTE: Custom inflections are not applicable.
1. Review recent change view 8.60.
2. Is the view populated?
If
YES
, no action is required, go to Section
3.8.4
.
If
NO
, continue with next Step.
3. To apply standard inflections, type and enter:
exc:envir:uproc,fn="/updtmp/annc/rc-std-infl";
Response: RC SCRIPT xxxxxxxxx COMPLETED
NOTE: The script execution may take several minutes depending on the number of recent change and
office activity.
4. Observe the
annc_log
file, type and enter
dump:file:all,fn="/updtmp/annc/annc_log",opl=2;
5. Correct any errors before continuing.
235-105-210 October 1999
Copyright © 1999 Page 12