Lucent Technologies 5ESS-2000 Operations And Maintenance Procedures Download Page 571

Page: 571 / 1421

Response:

FACILITY EQUIPMENT (IFAC)

page displayed. Cursor at SM attribute.

Using the selected work order Form 20.23 as a guide, type and enter the indicated values for each KEY
attribute.

        KEY ATTRIBUTES:
        1. SM         ___
        2. IDCU       _
        3. LSI        _

What is cursor response?

If positioned at the first IFAC EQSTAT attribute, then go to Step 9.

If ``DUPLICATE FORM'', then continue with next Step.

Type and enter

Response:

ENTER DATA BASE OPERATION

I=Insert, R=Review, U=Update, D=Delete:

Type and enter

Response:

FACILITY EQUIPMENT (IFAC)

page displayed. Cursor at SM attribute.

Go to Step 12.

Using the selected work order form as a guide, type and enter the indicated values for each remaining
attribute.

Type and enter a

for the EQSTAT attribute for each IFAC being grown.

Response:

Enter Insert, Change, Validate, Screen#, or Print:

10.

Type and enter

Response:

inserting ....FORM INSERTED

FACILITY EQUIPMENT (IFAC)

page displayed.

11.

Go to Step 25.

12.

Using the selected work order form as a guide, type and enter the indicated values for each KEY attribute.

Response:

System completes remainder of view.

Enter Update, Change, Validate, Screen#, or Print:

13.

Type and enter

Response:

Change Field:

235-105-210

October 1999

Page 3

Summary of Contents for 5ESS-2000




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5ESS-2000

Reviews:

Related manuals for 5ESS-2000

Brands by name

Popular brands

Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Search results

Summary of Contents for 5ESS-2000

Reviews:

Related manuals for 5ESS-2000

Brands by name

Popular brands