Lucent Technologies 5ESS-2000 Operations And Maintenance Procedures Download Page 898

Page: 898 / 1421

YES

, continue with next Step.

, go to Procedure

11.45.2.2

At the MCC toggle the CMD/MSG key until the terminal is in the menu mode.

At the MCC type and enter menu command:

196

Reference:

Procedure 11.1

To update the RC/V view, type and enter

18.15u

Response:

REMOTE TERMINAL

page displayed. Cursor at SM attribute.

Type and enter the KEY attributes.

Response:

System populates remainder of view.

Enter Update, Change, Validate, Screen#, or Print:

Type and enter

Response:

Change Field:

Type and enter

Response:

Cursor at

RT LINE SIZE

attribute

Type and enter the new line size value from the work order form.

Response:

Change Field:

Enter

CARRIAGE RETURN

Response:

Enter Update, Change, Validate, Screen#, or Print:

10.

Type and enter

Response:

updating . . . FORM UPDATED. REMOTE TERMINAL

page displayed.

Cursor at the

attribute.

11.

Type and enter

Response:

18.0 SM & REMOTE TERMINALS VIEWS

page displayed.

12.

Type and enter

Response:

RCV-196 COMPLETED

235-105-210

October 1999

Page 19

Summary of Contents for 5ESS-2000




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5ESS-2000

Reviews:

Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures, Page: 898 / 1421

Search results

Summary of Contents for 5ESS-2000

Reviews: