Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 875 / 1421

NOTE: This procedure assumes the MCTSI Side 1 is standby. If necessary, execute a switch to achieve this
condition.
1. If necessary, at the MCC, execute a switch by typing and entering:
SW:MCTSI=
a
Where: a = SM-2000 number
Response: SW MCTSI a COMPLETED
2. At the MCC, remove MCTSI Side 1 from service by typing and entering:
RMV:MCTSI=
a
-1
Where: a = SM-2000 number
Response:
RMV MCTSI
a
1 COMPLETED
11.44.16 Update the MCTSI CLI Value for MCTSI Side 1
1. At the RCV terminal, type and enter
18.1
Response: Enter Database Operation
I=Insert R=Review U=Update D=Delete:
2. Type and enter U
Response:
SWITCHING MODULE SCREEN 1 of 5
page displayed. Cursor at SM attribute.
3. Select the completed GRCV form 18.1, for the identified SM-2000. This form should have the KEY attributes
listed in the following display:
*1. SM ___
4. Using the selected GRCV form as a guide, type and enter the value for each key (*) attribute listed.
Response: System completes remainder of form.
Enter Update, Change, Validate, screen#, or Print:
5. Type and enter
C
Response:
Change field:
6. Type and enter 16
Response: Cursor at MCTSI CLI attribute.
7. Type and enter
5
Response:
Change field:
235-105-210 October 1999
Copyright © 1999 Page 7