Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 570 / 1421

BKUP:ODD;
NOTE: Prior to the given response, there will be completed responses for each SM, the administrative
module (AM), and the communication module processor (CMP), if applicable.
Response: BKUP ODD COMPLETED
NOTE: Data base backup will take several minutes to complete.
11.10.2 Allow Peripheral Fault Recovery (PFR) Messages to Be Printed
1. At MCC, type and enter the following command:
CHG:LPS,MSGCLS=ALL, TOBKUP
Response: OK
with exceptions
2. At MCC, type and enter the following command:
CHG:LPS,MSGCLS=ALL,PRINT=ON,LOG=OFF;
Response: OK
3. At MCC, type and enter the following command:
SET:PERPH,SM=a,VERBOSE;
Where:
a = SM number.
Response: OK
4. At MCC, type and enter the following command:
INH:BREVC,SM=a;
Where:
a = SM number.
Response: OK
11.10.3 Add IFACs Into Data Base
1. Select and prepare terminal for recent change and verify activities.
Reference: Procedure 11.1
2. Type and enter
20.23
Response: Enter Data Base Operation
I=Insert, R=Review, U=Update, D=Delete:
3. Type and enter
I
235-105-210 October 1999
Copyright © 1999 Page 2