Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 1170 / 1421

type input message:
INH:BREVC,SM=
a
;
or
type and enter input command:
609
(1800,a CMD)
Where:
a = SM number
Response: OK
14.15.3 SAFE STOP POINT
1. Safe Stop Points are provided in the procedure set where progress in the performance of a procedure may
be suspended temporarily without causing degradation in the operation of the equipment. Performance of the
procedure can be halted at one of these points only if all prior steps within the procedure have been
successfully completed.
14.15.4 CI TO CI2 CONVERSION
14.15.4.1 Remove Module Controller/Time Slot Interchange (MCTSI) Side 0 from Service
1. At MCC, either:
type input message:
RMV:MCTSI=
a
-0;
or
type and enter input command:
200
(1190,a CMD)
Where:
a = SM number
Response: RMV MCTSI=
a
-0 COMPLETED
14.15.4.2 Update Module Controller (MC) Side 0 CI2 Circuit Change Level Indicator (CLI)
1. Obtain the completed growth recent change and verify (GRCV) form
18.2
for the identified CI2. This form
should have the KEY(*) attributes listed for side 0.
Select and prepare terminal for recent change and verify (RC/V) activities.
Reference: Procedure 11.1
2. At the RC/V terminal, type and enter 18.2U
Response: CONTROL INTERFACE (SM & RSM MODULES)
page displayed.
Cursor at
SM
attribute.
3. Type and enter the KEY (*) attribute values from the GRCV form for Side 0:
*1. SM _______
*2. MC _______
*3. CI _______
Response:
System populates remainder of view.
Enter Update, Change, Validate, or Print:
235-105-210 October 1999
Copyright © 1999 Page 5