Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures, Page: 1044 / 1421

automatic scheduling or through the manual execute (EXC) command for an entire office, a single module, and/or a
single test type. If a unit and/or test type is currently allowed, the allow command will merely give craft
acknowledgment. At full initialization time, all modules (CM and SMs/SM-2000s) and tests are allowed.
See Procedure 13.13 for complete command syntax.
12.4.8.2 Unit Allow
Those units that have been inhibited for diagnostic test via the unit inhibit command can be allowed for test again by
using the unit allow command. When the last unit in a module has been allowed for DGN test, the SM status (STAT)
box for that module will not display the REX inhibit status.
NOTE: The unit allow command does not apply to ELS and FAB test types.
See Procedure 13.14 for complete command syntax.
12.5 REX AUTOMATIC SCHEDULING
12.5.1 General
The REX program obtains the schedule from the ODD relation ``rlRXSCHD'' for the current day at midnight.
Therefore, if the REX schedule is modified, the new schedule is not effective until the midnight following the change.
Routine exercise tests may also be started and stopped automatically as described in the ODD. The 5ESS-2000
switch RC/V mechanism may be used to alter and view the scheduled start and stop times.
Each module has a RC/V display page containing the time of day (hours and minutes in military time) at which test
scheduling should begin, the scheduling duration (hours), a verbose option flag, and the day of the week test
scheduling should take place. See Figure 12-1 .
5ESS(R) SWITCH
RECENT CHANGE
ROUTINE EXERCISE SCHEDULE VIEW - 8.3
DIAGNOSTICS ELS FABRIC
*1. ENTITY ___ START TIME - HOURS 2. ___ 13. ___ 24. ___
START TIME - MINUTES 3. ___ 14. ___ 25. ___
DURATION OF TESTS 4. ___ 15. ___ 26. ___
REX VERBOSE 5. ___ 16. ___ 27. ___
SUNDAY 6. ___ 17. ___ 28. ___
MONDAY 7. ___ 18. ___ 29. ___
TUESDAY 8. ___ 19. ___ 30. ___
WEDNESDAY 9. ___ 20. ___ 31. ___
THURSDAY 10. ___ 21. ___ 32. ___
FRIDAY 11. ___ 22. ___ 33. ___
SATURDAY 12. ___ 23. ___ 34. ___
Figure 12-1 Recent Change REX (View 8.3)
If the verbose option is specified for a module, it will result in the REX started and completed message along with
each unit completion message being sent to the DAYLOG file. All TLP data that results from failing diagnostics will
still be sent to the ROP. The message class used to retrieve REX messages from the daylog file is lrex. See the
235-105-210 October 1999
Copyright © 1999 Page 6