Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 848 / 1421

2. At the RC/V terminal, type and enter
22.2U
Response: EQUIPMENT UNIT -- PACKET SWITCH UNIT
page displayed.
Cursor at SM attribute.
3. Select the completed GRCV form 22.2 for the identified PSU. This form should have the KEY attributes listed
in the following display:
*1. SM ____
*2. PSU ____
4. Using the selected GRCV form as a guide, type and enter the value for each KEY (*) attribute listed.
Response:
System completes remainder of form.
Enter Update, Change, Validate, screen#, or Print:
5. Type and enter
C
Response:
Change field:
6. Type and enter 17
Response: Cursor at CLI SG1 attribute.
7. Type and enter the value corresponding to the CLI SG1 attribute on the GRCV form.
Response:
Change field:
8. Enter
CARRIAGE RETURN.
Response: Enter Update, Change, Validate, screen#, or Print:
9. Type and enter U
Response:
updating...FORM UPDATED
EQUIPMENT UNIT -- PACKET SWITCH UNIT
page displayed.
Cursor at SM attribute.
10. Go to Step 19.
11. At the RC/V terminal, type and enter
22.3U
Response: EQUIPMENT UNIT -- PACKET SWITCH UNIT SHELF (1-4) page displayed.
Cursor at SM attribute.
12. Select the completed GRCV form
22.3
for the identified PSU Shelf. This form should have the KEY attributes
listed in the following display:
*1. SM ____
*2. PSU ____
*3. SHELF ____
235-105-210 October 1999
Copyright © 1999 Page 9