Lucent Technologies 5ESS-2000 Operations And Maintenance Procedures Download Page 1235

Page: 1235 / 1421

Figure 14.22-1 DSU2-RAF Service Group

The update configuration package includes the following that is provided by Lucent Technologies:



RAF memory expansion pack (TN1054).

NOTE:

There are two memory expansion pack positions. The update may not require a new memory

expansion pack but only a replacement of the existing pack.



1 9-track 6250 BPI magnetic tape and/or 1 DAT tape containing the recent change scripts (if Engineered
Ordered).



1 printed copy of custom phrases.

The update process contains 4 major elements:



Insert and install new memory pack (TN1054).



Perform recent change script update.



Verify custom announcements.



Update data base.

Completed growth recent change and verify (GRCV) forms should be provided by the telephone company/switch
owner regional engineering group.

235-105-210

October 1999

Page 2

«
...
1233
1234
1235
1236
1237
...
»

Summary of Contents for 5ESS-2000




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5ESS-2000

Reviews:

Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures, Page: 1235 / 1421

Search results

Summary of Contents for 5ESS-2000

Reviews: