Lucent Technologies 5ESS-2000, Operations And Maintenance Procedures

Page: 1145 / 1421

NOTE: Refer to office records.
If
YES
, go to Procedure
14.11.3
.
If
NO
, continue with next step.
4. At the RC/V terminal, type and enter
5.1i
Response:
The RC_TKGP view is displayed. The cursor is positioned at the TGN field.
5. Type and enter data for the following fields:
5E10
(*)1 TGN ____ (Trunk Group Number from office records)
7 RMK ISTF-LOOPBACK
#8 TRK DIR
LTP
#9 HUNT TYPE FIFO
#13 TRK CLASS LTPISTFL
19 IAPT Y
83 NCD SCRN NONE
5E11
(*)1 TGN ____ (Trunk Group Number from office records)
6 RMK
ISTF-LOOPBACK
#7 TRK DIR LTP
#8 HUNT TYPE FIFO
#12 TRK CLASS LTPISTFL
18 IAPT Y
83 NCD SCRN
NONE
NOTE: Each screen is individually inserted. For fields requiring no entry, type and enter an apostrophe (') to
blank the field. For default values, type and enter a semicolon (;).
6. To insert the data, type and enter i
Response:
inserting . . . FORM INSERTED flashes in upper-right corner of screen. The cursor moves to
the TGN field.
7. Once all data is entered, return to the RC/V class menu.
14.11.2 Safe Stop Point
1. This is a safe stop point.
14.11.3 Verify DG RESP LTP Trunk Group Data
1. At the RC/V terminal, type and enter 5.1v
Response:
TRUNK GROUP page displayed. Cursor at TGN attribute.
2. Type and enter appropriate TGN.
Response:
System completes remainder of view.
Enter Review, Validate, or Print:
3. Verify data is correct.
NOTE: Make error corrections as required using terminal in the update mode.
235-105-210 October 1999
Copyright © 1999 Page 2