manualshive.com logo in svg

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Introducing the Lenovo 70B4, a high-performance device designed to enhance your productivity. Accessing its full potential is made easier with the free User Manual and Hardware Maintenance Manual available for download from manualshive.com. Stay informed, troubleshoot, and optimize your experience with these comprehensive manuals at your fingertips.

Share
Download
background image

Note:

Using a consistency check rate of 0 or 100 percent is not recommended. The default value is 30

percent.

1. Start the LSI Software RAID Configuration Utility program. See “Starting the LSI Software RAID

Configuration Utility program” on page 74.

2. On the main interface of the program, select

Objects

➙

Adapter

➙

Chk Const Rate

.

3. Set the consistency check rate by typing a desired value from the keyboard directly.

Installing and using the MegaRAID Storage Manager program

You can install and use the MegaRAID Storage Manager program to manage the RAID array and RAID
controller in an operating system environment after configuring RAID.

The installation package for the MegaRAID Storage Manager program is on the

ThinkServer EasyStartup

DVD. After you enter the operating system, insert the

ThinkServer EasyStartup

DVD into the optical drive.

The installation package for the MegaRAID Storage Manager program is located in the Utilities and Others
folder in the root directory of the DVD.

To install and use the MegaRAID Storage Manager program, refer to the following chapters in the

MegaRAID

SAS Software User Guide

on the documentation DVD that comes with your server:

Note:

Some information in these chapters might be intended for the advanced SATA/SAS hardware RAID

configurations and might not apply to the ThinkServer RAID 100 or RAID 300 configurations.

• “MegaRAID Storage Manager Overview and Installation”

• “MegaRAID Storage Manager Window and Menus”

• “Monitoring System Events and Storage Devices”

• “Maintaining and Managing Storage Configurations”

The

MegaRAID SAS Software User Guide

also is available on the Lenovo Web site at:

http://www.lenovo.com/UserManuals

Configuring the advanced SATA/SAS hardware RAID

Before configuring RAID for your server, observe the following precautions:

• Use hard disk drives that are of the same type (SATA or SAS) and have the same capacity within a

single RAID array.

• The total drive capacity of the primary RAID array is limited to 2 TB.

Some server models come with a RAID card to provide advanced SATA/SAS hardware RAID functions. You
also can purchase a supported RAID card from Lenovo and install it into the server. See “RAID card”
on page 35.

The RAID card provides the WebBIOS Configuration Utility program to help you configure RAID
independently of the operating system. You also can install the MegaRAID Storage Manager program and
the MegaCLI Configuration Utility program to help you manage the RAID array and RAID controller in an
operating system environment.

The installation packages for the MegaRAID Storage Manager program and the MegaCLI Configuration
Utility program are on the

ThinkServer EasyStartup

DVD. After you enter the operating system, insert the

ThinkServer EasyStartup

DVD into the optical drive. The installation packages for the programs are located in

the Utilities and Others folder in the root directory of the DVD.

Note:

The

ThinkServer EasyStartup

DVD is designed for different types of servers and the Utilities and Others

folder might contain additional installation packages that are not required to be installed on your server.

Chapter 5

.

Configuring the server

79

Summary of Contents for 70B4























































































































































































































































Reviews:

No comments

Related manuals for 70B4

Ace c3700 - Workstation Manual preview
c3700 - Workstation
Brand: Ace Pages: 21
IBM 2292 Hardware Maintenance Manual preview
2292
Brand: IBM Pages: 230
NEC POWERMATE ES 5250 - S Release Note preview
POWERMATE ES 5250 - S
Brand: NEC Pages: 18
NEC POWERMATE VT 300 RELEASE NOTES Release Note preview
POWERMATE VT 300 RELEASE NOTES
Brand: NEC Pages: 16
NEC POWERMATE CT 815 - RELEASE NOTES Service And Reference Manual preview
POWERMATE CT 815 - RELEASE NOTES
Brand: NEC Pages: 155
NEC NP-PH1000U Quick Setup Manual preview
NP-PH1000U
Brand: NEC Pages: 6
NEC POWERMATE ES Series Service And Reference Manual preview
POWERMATE ES Series
Brand: NEC Pages: 132
NEC POWERMATE ES Series Release Note preview
POWERMATE ES Series
Brand: NEC Pages: 8
NEC PowerMate CT Service And Reference Manual preview
PowerMate CT
Brand: NEC Pages: 167
NEC MultiSync V552 Product Specifications preview
MultiSync V552
Brand: NEC Pages: 1
Data General AViiON 3000 Manual preview
AViiON 3000
Brand: Data General Pages: 132
C&T VCO-6020-1050TI User Manual preview
VCO-6020-1050TI
Brand: C&T Pages: 79
Gateway GM5260 Hardware Reference Manual preview
GM5260
Brand: Gateway Pages: 52
IEI Technology AFL-26A-9652 User Manual preview
AFL-26A-9652
Brand: IEI Technology Pages: 165
Advantech ARK-3531 Series User Manual preview
ARK-3531 Series
Brand: Advantech Pages: 84
Moxa Technologies ThinkCore V481 User Manual preview
ThinkCore V481
Brand: Moxa Technologies Pages: 37
Emerson Rosemount TankRadar SCC 5320 Instruction Manual preview
Rosemount TankRadar SCC 5320
Brand: Emerson Pages: 4
Emerson FloBoss S600 Instruction Manual preview
FloBoss S600
Brand: Emerson Pages: 108

Brands by name

Popular brands

Load more brands