Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 103

Page: 103 / 246

5. Reinstall the PCI card bracket assembly by doing the following:

a. Install the small low-profile PCI card bracket into the main PCI card bracket.

• To secure the PCI card seated in the PCI-E slot 5, install the small low-profile PCI card bracket

into the third slot (from top to bottom) of the main PCI card bracket.

Figure 40. Installing the small bracket into the third slot of the main bracket

• To secure the PCI card seated in the PCI-E slot 4, install the small low-profile PCI card bracket

into the fourth slot (from top to bottom) of the main PCI card bracket.

Figure 41. Installing the small bracket into the fourth slot of the main bracket

Chapter 6

Installing, removing, or replacing hardware

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands