Lenovo 70B4 User Manual And Hardware Maintenance Manual Download Page 121

Page: 121 / 246

6. Note the orientation of the new ThinkServer RAID Super Capacitor Module. Then, gently press the tab

on the bracket and install the new ThinkServer RAID Super Capacitor Module into the bracket at

the same time.

Figure 54. Installing the ThinkServer RAID Super Capacitor Module into the bracket

7. Position the new ThinkServer RAID Super Capacitor Module with the bracket on the chassis so that the

mounting studs on the chassis pass through the corresponding holes in the bracket. Then, install the
screw to the mounting stud

to secure the ThinkServer RAID Super Capacitor Module bracket.

/MGMT

Figure 55. Installing the ThinkServer RAID Super Capacitor Module with the bracket on the chassis

Chapter 6

Installing, removing, or replacing hardware

109

Summary of Contents for 70B4























































































































































































































































Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands

Lenovo 70B4, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70B4

Reviews:

Related manuals for 70B4

Brands by name

Popular brands